Reference Lysozyme data from the first kilohertz serial crystallography experiments with the JUNGFRAU 4M detector at a 4th generation synchrotron source doi-10-48391-b0c36bb8-a00c-4519-8dcc-08d5ca60a313-0 https://doi.org/10.48391/B0C36BB8-A00C-4519-8DCC-08D5CA60A313 Swedish National Data Service Svensk nationell datatjänst Landing page Reference Lysozyme data from the first kilohertz serial crystallography experiments with the JUNGFRAU 4M detector at a 4th generation synchrotron source doi-10-48391-b0c36bb8-a00c-4519-8dcc-08d5ca60a313-0 https://doi.org/10.48391/B0C36BB8-A00C-4519-8DCC-08D5CA60A313 Leonarski, Filip Nan, Jie Matej, Zdenek Bertrand, Quentin Furrer, Antonia Gorgisyan, Ishkhan Bjelčić, Monika Kepa, Michal Glover, Hannah Hinger, Viktoria Eriksson, Thomas Cehovin, Aleksander Eguiraun, Mikel Gasparotto, Piero Mozzanica, Aldo Weinert, Tobias Gonzalez, Ana Standfuss, Jörg Wang, Meitian Ursby, Thomas Dworkowski, Florian Swedish National Data Service Svensk nationell datatjänst Landing page The experiment is a collaboration between MAX IV and PSI to prove the feasibility to use the high frame-rate state of the art integrating pixel detector (JUNGFRAU) for serial crystallography experiments at a 4th generation synchrotron light source. A PSI-provided JUNGFRAU 4M prototype detector was installed at the BioMAX beamline. The serial synchrotron crystallography (SSX) experiment was using the MAX IV high-viscosity extruder (HVE) for sample delivery. Two reference datasets were collected at 1 kHz and 2 kHz framerates. The third reference dataset was collected with frame rate 100 Hz using 1 kHz detector settings and adjusted flux and jet parameters in order to preserve constant radiation dose. Access to data through an external actor. Åtkomst till data via extern aktör.