https://researchdata.se/en/catalogue Search results en The GIS-based Time model of Gothenburg aims to map the process of urban development in Gothenburg since 1960 and in particular to document the changes in the spatial form of the city - streets, buildings and plots - through time. Major steps have in recent decades been taken when it comes to understanding how cities work. Essential is the change from understanding cities as locations to understanding them as flows (Batty 2013)1. In principle this means that we need to understand locations (or places) as defined by flows (or different forms of traffic), rather than locations only served by flows. This implies that we need to understand the built form and spatial structure of cities as a system, that by shaping flows creates a series of places with very specific relations to all other places in the city, which also give them very specific performative potentials. It also implies the rather fascinating notion that what happens in one place is dependent on its relation to all other places (Hillier 1996)2. Hence, to understand the individual place, we need a model of the city as a whole. Extensive research in this direction has taken place in recent years, that has also spilled over to urban design practice, not least in Sweden, where the idea that to understand the part you need to understand the whole is starting to be established. With the GIS-based Time model for Gothenburg that we present here, we address the next challenge. Place is not only something defined by its spatial relation to all other places in its system, but also by its history, or its evolution over time. Since the built form of the city changes over time, often by cities growing but at times also by cities shrinking, the spatial relation between places changes over time. If cities tend to grow, and most often by extending their periphery, it means that most places get a more central location over time. If this is a general tendency, it does not mean that all places increase their centrality to an equal degree. Depending on the structure of the individual city’s spatial form, different places become more centrally located to different degrees as well as their relative distance to other places changes to different degrees. The even more fascinating notion then becomes apparent; places move over time! To capture, study and understand this, we need a "time model". The GIS-based time model of Gothenburg consists of: • 12 GIS-layers of the street network, from 1960 to 2015, in 5-year intervals • 12 GIS-layers of the buildings from 1960 to 2015, in 5-year intervals - Please note that this dataset has been moved to a separate catalog post (https://doi.org/10.5878/t8s9-6y15) and unpublished due to licensing restrictions on its source dataset. • 12 GIS- layers of the plots from1960 to 2015, in 5-year intervals In the GIS-based Time model, for every time-frame, the combination of the three fundamental components of spatial form, that is streets, plots and buildings, provides a consistent description of the built environment at that particular time. The evolution of three components can be studied individually, where one could for example analyze the changing patterns of street centrality over time by focusing on the street network; or, the densification processes by focusing on the buildings; or, the expansion of the city by way of occupying more buildable land, by focusing on plots. The combined snapshots of street centrality, density and land division can provide insightful observations about the spatial form of the city at each time-frame; for example, the patterns of spatial segregation, the distribution of urban density or the patterns of sprawl. The observation of how the interrelated layers of spatial form together evolved and transformed through time can provide a more complete image of the patterns of urban growth in the city. The Time model was created following the principles of the model of spatial form of the city, as developed by the Spatial Morphology Group (SMoG) at Chalmers University of Technology, within the three-year research project ‘International Spatial Morphology Lab (SMoL)’. The project is funded by Älvstranden Utveckling AB in the framework of a larger cooperation project called Fusion Point Gothenburg. The data is shared via SND to create a research infrastructure that is open to new study initiatives. 1. Batty, M. (2013), The New Science of Cities, Cambridge: MIT Press. 2. Hillier, B., (1996), Space Is the Machine. Cambridge: University of Cambridge - 12 GIS-layers of the street network in Gothenburg, from 1960 to 2015, in 5-year intervals. File format: shapefile (.shp), MapinfoTAB (.TAB). The coordinate system used is SWEREF 99TM, EPSG:3006. - 12 GIS-layers of plots in Gothenburg, from 1960 to 2015, in 5-year intervals. Only built upon plots (plots with buildings) are included. File format: shapefile (.shp), MapinfoTAB (.TAB). The coordinate system used is SWEREF 99TM, EPSG:3006. See the attached Technical Documentation for the description and further details on the production of the datasets. See the attached Report for the description of the related research project. Fri, 12 Sep 2025 08:58:29 GMT https://researchdata.se/en/catalogue/dataset/snd1154-1 https://researchdata.se/en/catalogue/dataset/snd1154-1 Chalmers University of Technology Ioanna Stavroulaki Lars Marcus Meta Berghauser Pont Ehsan Abshirini Jan Sahlberg Alice Örnö Ax GIS-datasets for the Street networks of Stockholm, Gothenburg and Eskilstuna produced as part of the Spatial Morphology Lab (SMoL). The goal of the SMoL project is to develop a strong theory and methodology for urban planning & design research with an analytical approach. Three frequently recurring variables of spatial urban form are studied that together quite well capture and describe the central characteristics and qualities of the built environment: density, diversity and proximity. The first measure describes how intensive a place can be used depending on how much built up area is found there. The second measure captures how differentiated the use of a place can be depending on the division in smaller units such as plots. The third measure describes how accessible a place is depending on how it relates with other places. Empirical studies have shown strong links between these metrics and people's use of cities such as pedestrian movement patterns. To support this goal, a central objective of the project is the establishment of an international platform of GIS data models for comparative studies in spatial urban form comprising three European capitals: London in the UK, Amsterdam in the Netherlands and Stockholm in Sweden, as well as two additional Swedish cities of smaller size than Stockholm: Gothenburg and Eskilstuna. The result of the project is a GIS database for the five cities covering the three basic layers of urban form: street network (motorised and non-motorised), buildings and plots systems. The data is shared via SND to create a research infrastructure that is open to new study initiatives. The datasets for Amsterdam will also be uploaded to SND. The datasets of London cannot be uploaded because of licensing restrictions. The street network GIS-maps include motorised and non-motorised networks. The non-motorized networks include all streets and paths that are accessible for people walking or cycling, including those that are shared with vehicles. All streets where walking or cycling is forbidden, such as motorways, highways, or high-speed tunnels, are not included in the network. The non-motorised network layers for Stockholm and Eskilstuna are based on the Swedish national road database, NVDB (Nationell Vägdatabas), downloaded from Trafikverket (https://lastkajen.trafikverket.se, date of download 15-5-2016, last update 8-11-2015) . For Gothenburg, it is based on Open Street Maps (openstreetmap.org, http://download.geofabrik.de, date of download 29-4-2016), because the NVDB did not provide enough detail for the non-motorized network, as in the other cities. The original road-centre-line maps of all cities were edited based on the same basic representational principles and were converted into line-segment maps, using the following software: FME, Mapinfo professional and PST (Place Syntax Tool). The coordinate system is SWEREF99TM. In the final line-segment maps (GIS-layers) all streets or paths are represented with one line irrespectively of the number of lanes or type, meaning that parallel lines representing a street and a pedestrian or a cycle path running on the side, are reduced to one line. The reason is that these parallel lines are nor physically or perceptually separated, and thus are accessible and recognized from pedestrians as one “line of movement” in the street network. If there are obstacles or great distance between parallel streets and paths, then the multiple lines remain. The aim is to make a skeletal network that better represents the total space, which is accessible for pedestrians to move, irrespectively of the typical separations or distinctions of streets and paths. This representational choice follows the Space Syntax methodology in representing the public space and the street network. We followed the same editing and generalizing procedure for all maps aiming to remove errors and to increase comparability between networks. This process included removing duplicate and isolated lines, snapping and generalizing. The snapping threshold used was 2m (end points closer than 2m were snapped together). The generalizing threshold used was 1m (successive line segments with angular deviation less than 1m were merged into one). In the final editing step, all road polylines were segmented to their constituting line-segments. The aim was to create appropriate line-segment maps to be analysed using Angular Segment Analysis, a network centrality analysis method introduced in Space Syntax. All network layers are complemented with an “Unlink points” layer; a GIS point layer with the locations of all non-level intersections, such as pedestrian bridges and tunnels. The Unlink point layer is necessary to conduct network analysis that takes into account the non-planarity of the street network, using such software as PST (Place Syntax Tool). For more detailed documentation on the creation of the non-motorised network of Gothenburg, please download the specific documentation file. Mon, 16 Nov 2020 11:23:50 GMT https://researchdata.se/en/catalogue/dataset/snd1153-1 https://researchdata.se/en/catalogue/dataset/snd1153-1 Chalmers University of Technology Ioanna Stavroulaki Meta Berghauser Pont Lars Marcus Kailun Sun GIS-datasets for the Street networks of Stockholm, Gothenburg and Eskilstuna produced as part of the Spatial Morphology Lab (SMoL). The goal of the SMoL project is to develop a strong theory and methodology for urban planning & design research with an analytical approach. Three frequently recurring variables of spatial urban form are studied that together quite well capture and describe the central characteristics and qualities of the built environment: density, diversity and proximity. The first measure describes how intensive a place can be used depending on how much built up area is found there. The second measure captures how differentiated the use of a place can be depending on the division in smaller units such as plots. The third measure describes how accessible a place is depending on how it relates with other places. Empirical studies have shown strong links between these metrics and people's use of cities such as pedestrian movement patterns. To support this goal, a central objective of the project is the establishment of an international platform of GIS data models for comparative studies in spatial urban form comprising three European capitals: London in the UK, Amsterdam in the Netherlands and Stockholm in Sweden, as well as two additional Swedish cities of smaller size than Stockholm: Gothenburg and Eskilstuna. The result of the project is a GIS database for the five cities covering the three basic layers of urban form: street network (motorised and non-motorised), buildings and plots systems. The data is shared via SND to create a research infrastructure that is open to new study initiatives. The datasets for Amsterdam will also be uploaded to SND. The datasets of London cannot be uploaded because of licensing restrictions. The street network GIS-maps include motorised and non-motorised networks. The non-motorized networks include all streets and paths that are accessible for people walking or cycling, including those that are shared with vehicles. All streets where walking or cycling is forbidden, such as motorways, highways, or high-speed tunnels, are not included in the network. The non-motorised network layers for Stockholm and Eskilstuna are based on the Swedish national road database, NVDB (Nationell Vägdatabas), downloaded from Trafikverket (https://lastkajen.trafikverket.se, date of download 15-5-2016, last update 8-11-2015). For Gothenburg, it is based on Open Street Maps (openstreetmap.org, http://download.geofabrik.de, date of download 29-4-2016), because the NVDB did not provide enough detail for the non-motorized network, as in the other cities. The original road-centre-line maps of all cities were edited based on the same basic representational principles and were converted into line-segment maps, using the following software: FME, Mapinfo professional and PST (Place Syntax Tool). The coordinate system is SWEREF99TM. In the final line-segment maps (GIS-layers) all streets or paths are represented with one line irrespectively of the number of lanes or type, meaning that parallel lines representing a street and a pedestrian or a cycle path running on the side, are reduced to one line. The reason is that these parallel lines are nor physically or perceptually separated, and thus are accessible and recognized from pedestrians as one “line of movement” in the street network. If there are obstacles or great distance between parallel streets and paths, then the multiple lines remain. The aim is to make a skeletal network that better represents the total space, which is accessible for pedestrians to move, irrespectively of the typical separations or distinctions of streets and paths. This representational choice follows the Space Syntax methodology in representing the public space and the street network. We followed the same editing and generalizing procedure for all maps aiming to remove errors and to increase comparability between networks. This process included removing duplicate and isolated lines, snapping and generalizing. The snapping threshold used was 2m (end points closer than 2m were snapped together). The generalizing threshold used was 1m (successive line segments with angular deviation less than 1m were merged into one). In the final editing step, all road polylines were segmented to their constituting line-segments. The aim was to create appropriate line-segment maps to be analysed using Angular Segment Analysis, a network centrality analysis method introduced in Space Syntax. All network layers are complemented with an “Unlink points” layer; a GIS point layer with the locations of all non-level intersections, such as pedestrian bridges and tunnels. The Unlink point layer is necessary to conduct network analysis that takes into account the non-planarity of the street network, using such software as PST (Place Syntax Tool). Mon, 16 Nov 2020 11:23:50 GMT https://researchdata.se/en/catalogue/dataset/snd1153-3 https://researchdata.se/en/catalogue/dataset/snd1153-3 Chalmers University of Technology Ioanna Stavroulaki Meta Berghauser Pont Lars Marcus Kailun Sun Ann Legeby GIS-datasets for the Street networks of Stockholm, Gothenburg and Eskilstuna produced as part of the Spatial Morphology Lab (SMoL). The goal of the SMoL project is to develop a strong theory and methodology for urban planning & design research with an analytical approach. Three frequently recurring variables of spatial urban form are studied that together quite well capture and describe the central characteristics and qualities of the built environment: density, diversity and proximity. The first measure describes how intensive a place can be used depending on how much built up area is found there. The second measure captures how differentiated the use of a place can be depending on the division in smaller units such as plots. The third measure describes how accessible a place is depending on how it relates with other places. Empirical studies have shown strong links between these metrics and people's use of cities such as pedestrian movement patterns. To support this goal, a central objective of the project is the establishment of an international platform of GIS data models for comparative studies in spatial urban form comprising three European capitals: London in the UK, Amsterdam in the Netherlands and Stockholm in Sweden, as well as two additional Swedish cities of smaller size than Stockholm: Gothenburg and Eskilstuna. The result of the project is a GIS database for the five cities covering the three basic layers of urban form: street network (motorised and non-motorised), buildings and plots systems. The data is shared via SND to create a research infrastructure that is open to new study initiatives. The datasets for Amsterdam will also be uploaded to SND. The datasets of London cannot be uploaded because of licensing restrictions. The street network GIS-maps include motorised and non-motorised networks. The motorised networks exclude all streets that are pedestrian-only and were cars are excluded. The network layers are based on the Swedish national road database, NVDB (Nationell Vägdatabas), downloaded from Trafikverket (https://lastkajen.trafikverket.se, date of download 15-5-2016, last update 8-11-2015). The original road-centre-line maps of all cities were edited based on the same basic representational principles and were converted into line-segment maps, using the following software: FME, Mapinfo professional and PST (Place Syntax Tool). The coordinate system is SWEREF99TM. In the final line-segment maps (GIS-layers) all roads are represented with one line irrespectively of the number of lanes, except from Motorways and Highways which are represented with two lines, one for each direction, again irrespectively of the number of lanes. We followed the same editing and generalizing procedure for all maps aiming to remove errors and to increase comparability between networks. This process included removing duplicate and isolated lines, snapping and generalizing. The snapping threshold used was 2m (end points closer than 2m were snapped together). The generalizing threshold used was 1m (successive line segments with angular deviation less than 1m were merged into one). In the final editing step, all road polylines were segmented to their constituting line-segments. The aim was to create appropriate line-segment maps to be analysed using Angular Segment Analysis, a network centrality analysis method introduced in Space Syntax. All network layers are complemented with an “Unlink points” layer; a GIS point layer with the locations of all non-level intersections, such as overpasses and underpasses, bridges, tunnels, flyovers and the like. The Unlink point layer is necessary to conduct network analysis that takes into account the non-planarity of the street network, using such software as PST (Place Syntax Tool). Mon, 16 Nov 2020 11:23:50 GMT https://researchdata.se/en/catalogue/dataset/snd1153-2 https://researchdata.se/en/catalogue/dataset/snd1153-2 Chalmers University of Technology Ioanna Stavroulaki Meta Berghauser Pont Lars Marcus Kailun Sun GIS-datasets for the Street networks of Stockholm, Gothenburg and Eskilstuna produced as part of the Spatial Morphology Lab (SMoL). The goal of the SMoL project is to develop a strong theory and methodology for urban planning & design research with an analytical approach. Three frequently recurring variables of spatial urban form are studied that together quite well capture and describe the central characteristics and qualities of the built environment: density, diversity and proximity. The first measure describes how intensive a place can be used depending on how much built up area is found there. The second measure captures how differentiated the use of a place can be depending on the division in smaller units such as plots. The third measure describes how accessible a place is depending on how it relates with other places. Empirical studies have shown strong links between these metrics and people's use of cities such as pedestrian movement patterns. To support this goal, a central objective of the project is the establishment of an international platform of GIS data models for comparative studies in spatial urban form comprising three European capitals: London in the UK, Amsterdam in the Netherlands and Stockholm in Sweden, as well as two additional Swedish cities of smaller size than Stockholm: Gothenburg and Eskilstuna. The result of the project is a GIS database for the five cities covering the three basic layers of urban form: street network (motorised and non-motorised), buildings and plots systems. The data is shared via SND to create a research infrastructure that is open to new study initiatives. The datasets for Amsterdam will also be uploaded to SND. The datasets of London cannot be uploaded because of licensing restrictions. The street network GIS-maps include motorised and non-motorised networks. The non-motorized networks include all streets and paths that are accessible for people walking or cycling, including those that are shared with vehicles. All streets where walking or cycling is forbidden, such as motorways, highways, or high-speed tunnels, are not included in the network. The non-motorised network layers for Stockholm and Eskilstuna are based on the Swedish national road database, NVDB (Nationell Vägdatabas), downloaded from Trafikverket (https://lastkajen.trafikverket.se, date of download 15-5-2016, last update 8-11-2015). For Gothenburg, it is based on Open Street Maps (openstreetmap.org, http://download.geofabrik.de, date of download 29-4-2016), because the NVDB did not provide enough detail for the non-motorized network, as in the other cities. The original road-centre-line maps of all cities were edited based on the same basic representational principles and were converted into line-segment maps, using the following software: FME, Mapinfo professional and PST (Place Syntax Tool). The coordinate system is SWEREF99TM. In the final line-segment maps (GIS-layers) all streets or paths are represented with one line irrespectively of the number of lanes or type, meaning that parallel lines representing a street and a pedestrian or a cycle path running on the side, are reduced to one line. The reason is that these parallel lines are nor physically or perceptually separated, and thus are accessible and recognized from pedestrians as one “line of movement” in the street network. If there are obstacles or great distance between parallel streets and paths, then the multiple lines remain. The aim is to make a skeletal network that better represents the total space, which is accessible for pedestrians to move, irrespectively of the typical separations or distinctions of streets and paths. This representational choice follows the Space Syntax methodology in representing the public space and the street network. We followed the same editing and generalizing procedure for all maps aiming to remove errors and to increase comparability between networks. This process included removing duplicate and isolated lines, snapping and generalizing. The snapping threshold used was 2m (end points closer than 2m were snapped together). The generalizing threshold used was 1m (successive line segments with angular deviation less than 1m were merged into one). In the final editing step, all road polylines were segmented to their constituting line-segments. The aim was to create appropriate line-segment maps to be analysed using Angular Segment Analysis, a network centrality analysis method introduced in Space Syntax. All network layers are complemented with an “Unlink points” layer; a GIS point layer with the locations of all non-level intersections, such as pedestrian bridges and tunnels. The Unlink point layer is necessary to conduct network analysis that takes into account the non-planarity of the street network, using such software as PST (Place Syntax Tool). Mon, 16 Nov 2020 11:23:50 GMT https://researchdata.se/en/catalogue/dataset/snd1153-5 https://researchdata.se/en/catalogue/dataset/snd1153-5 Chalmers University of Technology Ioanna Stavroulaki Meta Berghauser Pont Lars Marcus Kailun Sun GIS-datasets for the Street networks of Stockholm, Gothenburg and Eskilstuna produced as part of the Spatial Morphology Lab (SMoL). The goal of the SMoL project is to develop a strong theory and methodology for urban planning & design research with an analytical approach. Three frequently recurring variables of spatial urban form are studied that together quite well capture and describe the central characteristics and qualities of the built environment: density, diversity and proximity. The first measure describes how intensive a place can be used depending on how much built up area is found there. The second measure captures how differentiated the use of a place can be depending on the division in smaller units such as plots. The third measure describes how accessible a place is depending on how it relates with other places. Empirical studies have shown strong links between these metrics and people's use of cities such as pedestrian movement patterns. To support this goal, a central objective of the project is the establishment of an international platform of GIS data models for comparative studies in spatial urban form comprising three European capitals: London in the UK, Amsterdam in the Netherlands and Stockholm in Sweden, as well as two additional Swedish cities of smaller size than Stockholm: Gothenburg and Eskilstuna. The result of the project is a GIS database for the five cities covering the three basic layers of urban form: street network (motorised and non-motorised), buildings and plots systems. The data is shared via SND to create a research infrastructure that is open to new study initiatives. The datasets for Amsterdam will also be uploaded to SND. The datasets of London cannot be uploaded because of licensing restrictions. The street network GIS-maps include motorised and non-motorised networks. The motorised networks exclude all streets that are pedestrian-only and were cars are excluded. The network layers are based on the Swedish national road database, NVDB (Nationell Vägdatabas), downloaded from Trafikverket (https://lastkajen.trafikverket.se, date of download 15-5-2016, last update 8-11-2015). The original road-centre-line maps of all cities were edited based on the same basic representational principles and were converted into line-segment maps, using the following software: FME, Mapinfo professional and PST (Place Syntax Tool). The coordinate system is SWEREF99TM. The map covers all Stockhom region (Stockholm Län). In the final line-segment maps (GIS-layers) all roads are represented with one line irrespectively of the number of lanes, except from Motorways and Highways which are represented with two lines, one for each direction, again irrespectively of the number of lanes. We followed the same editing and generalizing procedure for all maps aiming to remove errors and to increase comparability between networks. This process included removing duplicate and isolated lines, snapping and generalizing. The snapping threshold used was 2m (end points closer than 2m were snapped together). The generalizing threshold used was 1m (successive line segments with angular deviation less than 1m were merged into one). In the final editing step, all road polylines were segmented to their constituting line-segments. The aim was to create appropriate line-segment maps to be analysed using Angular Segment Analysis, a network centrality analysis method introduced in Space Syntax. All network layers are complemented with an “Unlink points” layer; a GIS point layer with the locations of all non-level intersections, such as overpasses and underpasses, bridges, tunnels, flyovers and the like. The Unlink point layer is necessary to conduct network analysis that takes into account the non-planarity of the street network, using such software as PST (Place Syntax Tool). Mon, 16 Nov 2020 11:23:50 GMT https://researchdata.se/en/catalogue/dataset/snd1153-4 https://researchdata.se/en/catalogue/dataset/snd1153-4 Chalmers University of Technology Ioanna Stavroulaki Meta Berghauser Pont Lars Marcus Kailun Sun Ann Legeby GIS-datasets for the Street networks of Stockholm, Gothenburg and Eskilstuna produced as part of the Spatial Morphology Lab (SMoL). The goal of the SMoL project is to develop a strong theory and methodology for urban planning & design research with an analytical approach. Three frequently recurring variables of spatial urban form are studied that together quite well capture and describe the central characteristics and qualities of the built environment: density, diversity and proximity. The first measure describes how intensive a place can be used depending on how much built up area is found there. The second measure captures how differentiated the use of a place can be depending on the division in smaller units such as plots. The third measure describes how accessible a place is depending on how it relates with other places. Empirical studies have shown strong links between these metrics and people's use of cities such as pedestrian movement patterns. To support this goal, a central objective of the project is the establishment of an international platform of GIS data models for comparative studies in spatial urban form comprising three European capitals: London in the UK, Amsterdam in the Netherlands and Stockholm in Sweden, as well as two additional Swedish cities of smaller size than Stockholm: Gothenburg and Eskilstuna. The result of the project is a GIS database for the five cities covering the three basic layers of urban form: street network (motorised and non-motorised), buildings and plots systems. The data is shared via SND to create a research infrastructure that is open to new study initiatives. The datasets for Amsterdam will also be uploaded to SND. The datasets of London cannot be uploaded because of licensing restrictions. The street network GIS-maps include motorised and non-motorised networks. The motorised networks exclude all streets that are pedestrian-only and were cars are excluded. The network layers are based on the Swedish national road database, NVDB (Nationell Vägdatabas), downloaded from Trafikverket (https://lastkajen.trafikverket.se, date of download 15-5-2016, last update 8-11-2015). The original road-centre-line maps of all cities were edited based on the same basic representational principles and were converted into line-segment maps, using the following software: FME, Mapinfo professional and PST (Place Syntax Tool). The coordinate system is SWEREF99TM. In the final line-segment maps (GIS-layers) all roads are represented with one line irrespectively of the number of lanes, except from Motorways and Highways which are represented with two lines, one for each direction, again irrespectively of the number of lanes. We followed the same editing and generalizing procedure for all maps aiming to remove errors and to increase comparability between networks. This process included removing duplicate and isolated lines, snapping and generalizing. The snapping threshold used was 2m (end points closer than 2m were snapped together). The generalizing threshold used was 1m (successive line segments with angular deviation less than 1m were merged into one). In the final editing step, all road polylines were segmented to their constituting line-segments. The aim was to create appropriate line-segment maps to be analysed using Angular Segment Analysis, a network centrality analysis method introduced in Space Syntax. All network layers are complemented with an “Unlink points” layer; a GIS point layer with the locations of all non-level intersections, such as overpasses and underpasses, bridges, tunnels, flyovers and the like. The Unlink point layer is necessary to conduct network analysis that takes into account the non-planarity of the street network, using such software as PST (Place Syntax Tool). Mon, 16 Nov 2020 11:23:50 GMT https://researchdata.se/en/catalogue/dataset/snd1153-6 https://researchdata.se/en/catalogue/dataset/snd1153-6 Chalmers University of Technology Ioanna Stavroulaki Meta Berghauser Pont Lars Marcus Kailun Sun GIS-datasets for the Street networks of Stockholm, Gothenburg and Eskilstuna produced as part of the Spatial Morphology Lab (SMoL). The goal of the SMoL project is to develop a strong theory and methodology for urban planning & design research with an analytical approach. Three frequently recurring variables of spatial urban form are studied that together quite well capture and describe the central characteristics and qualities of the built environment: density, diversity and proximity. The first measure describes how intensive a place can be used depending on how much built up area is found there. The second measure captures how differentiated the use of a place can be depending on the division in smaller units such as plots. The third measure describes how accessible a place is depending on how it relates with other places. Empirical studies have shown strong links between these metrics and people's use of cities such as pedestrian movement patterns. To support this goal, a central objective of the project is the establishment of an international platform of GIS data models for comparative studies in spatial urban form comprising three European capitals: London in the UK, Amsterdam in the Netherlands and Stockholm in Sweden, as well as two additional Swedish cities of smaller size than Stockholm: Gothenburg and Eskilstuna. The result of the project is a GIS database for the five cities covering the three basic layers of urban form: street network (motorised and non-motorised), buildings and plots systems. The data is shared via SND to create a research infrastructure that is open to new study initiatives. The datasets for Amsterdam will also be uploaded to SND. The datasets of London cannot be uploaded because of licensing restrictions. The street network GIS-maps include motorised and non-motorised networks. The motorised networks exclude all streets that are pedestrian-only and were cars are excluded. The network layers are based on the Swedish national road database, NVDB (Nationell Vägdatabas), downloaded from Trafikverket (https://lastkajen.trafikverket.se, date of download 15-5-2016, last update 8-11-2015). The original road-centre-line maps of all cities were edited based on the same basic representational principles and were converted into line-segment maps, using the following software: FME, Mapinfo professional and PST (Place Syntax Tool). The coordinate system is SWEREF99TM. The map covers all Västra Götaland region (Västra Götalands län). In the final line-segment maps (GIS-layers) all roads are represented with one line irrespectively of the number of lanes, except from Motorways and Highways which are represented with two lines, one for each direction, again irrespectively of the number of lanes. We followed the same editing and generalizing procedure for all maps aiming to remove errors and to increase comparability between networks. This process included removing duplicate and isolated lines, snapping and generalizing. The snapping threshold used was 2m (end points closer than 2m were snapped together). The generalizing threshold used was 1m (successive line segments with angular deviation less than 1m were merged into one). In the final editing step, all road polylines were segmented to their constituting line-segments. The aim was to create appropriate line-segment maps to be analysed using Angular Segment Analysis, a network centrality analysis method introduced in Space Syntax. All network layers are complemented with an “Unlink points” layer; a GIS point layer with the locations of all non-level intersections, such as overpasses and underpasses, bridges, tunnels, flyovers and the like. The Unlink point layer is necessary to conduct network analysis that takes into account the non-planarity of the street network, using such software as PST (Place Syntax Tool). Mon, 16 Nov 2020 11:23:50 GMT https://researchdata.se/en/catalogue/dataset/snd1153-7 https://researchdata.se/en/catalogue/dataset/snd1153-7 Chalmers University of Technology Ioanna Stavroulaki Meta Berghauser Pont Lars Marcus